Compared to a sit-down unit, the stand-up lift truck unit is totally different to use. The way wherein you pick up cargo and your movements are completely different. If you do not have proper training for utilizing a stand-up unit, you could possibly cause harm to yourself or to co-workers. When operating a stand-up model, you should follow the correct safety rules. There are a few basic operating standards that need to be met when utilizing a stand-up model.
To begin on a stand-up model lift truck, it is vital to get a good feel for the steering knob and the controls. Instead of a steering wheel, the steering is handled with the knob steering plate. Take note that this knob moves exceptionally fast, therefore, you have to get used to moving it carefully so as to be certain not to over steer. The horn is situated on the control handle, like with the control for the fork movement and for backwards, forwards. The floor pedal allows the machine to move.
When you are ready to start, turn the key to start the forklift. Be sure that your forks are retracted. If you are moving around the floor, the forks must be pointed slightly upwards. Do not drive with extended forks. If you are traveling forwards, move the control handle forward and step on the pedal to make the lift move forward. If you are backing up, be sure to beep your horn to warn those around you. Look behind you prior to stepping on the pedal so as to make sure the way is safe and clear. After that, while stepping on the pedal, pull the control handle towards you. Stay alert and focused and make sure that you are always operating in a safe manner.
When it comes to turning corners, turn your steering knob in the direction you need to go while keeping your hand on the control handle and your foot on the power pedal. When turning right, the steering knob will move in a clockwise direction during forward travel. If you are turning left, your steering knob will go in a counter-clockwise direction.
The stand-up models take some getting used to, particularly if you have just operated sit down models. If you take some time to know the equipment and with some training, you could efficiently and quickly handle loads in little time.