Nearly all of the time, companies will spend lots of money to buy their forklifts. It is essential, therefore to take proper care of your machine to protect your investment into the long run. It is really a good idea to know the procedures which are undertaken in taking care of and maintaining this machine.
Among the best ways to tell how good the engine is performing is by starting the lift truck up and listening closely to see how it runs. Like for instance, if there are any knocks or misses, the equipment is faulty and this must raise several issues. What's more listen carefully for any squealing sounds that come from the belts as these noises will provide you with a lot of information.
Some of the main components requiring attention during maintenance comprise the horn, safety warning devices, gauges, the lights and the overhead guard. Any burnt out light bulbs or faulty parts should be replaced as soon as they are noticed. It is also imperative to inspect the wiring.
When the above parts have been inspected thoroughly, proceed to the battery compartment in order to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Every battery cell should be inspected in order to make certain that the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machine and after that change the filters. The hydraulic filter, the transmission filter and the fuel filters should be replaced on a regular basis. Before fitting them, be sure to write the date on the new filters by using a permanent marker in order to keep track.
When the oil change has been done and new filters have been fitted, visually check the drive axle from beneath the equipment. Be certain to grease the axle if there is any grease fitting. Check the engine belts for any frays or cracks. If you find any, fix the issue accordingly. After that, check each and every other component of the machinery like the wheels. If any kind of fault or concern is detected, be certain to deal with it immediately so as to make certain the equipment is running at its safest and optimum levels.